Sensor head LJ-S015

LJ-S015 - Sensor head

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model			LJ-S015
Reference distance			56.5 mm^*1
Measurement range	Z-axis (height)		±4 mm (F.S.=8 mm)
	X-axis (width)	NEAR side	14 mm
		Reference distance	15 mm
		FAR side	16 mm
	Y-axis	Reference distance	25 mm
XY data interval			5 μm
Number of XY data points			3200 × 5000
Light source	Laser light source		405 nm (visible light) wavelength blue semiconductor laser
	Laser class		Class 2M laser product^2 (IEC 60825-1, FDA (CDRH) Part 1040.10^3)
	Output		10 mW
Repeatability	Z-axis (height)		0.3 μm^*4
	XY (distance)		0.5 μm^*5
Linearity	Standard area		±0.035% of F.S.^*6
	High-accuracy area		-
Imaging time			Min. 0.2 sec^*7
I/F	Ethernet		1000BASE-T, 100BASE-TX
	Input		LASER_ON, TRG, MEM_CLEAR^*8
	Output		READY, EXPOSURE_BUSY, ERROR^*8
Ratings	Power voltage		24 V +25%, -20%
	Current consumption / Power		Max. 4.0 A (at 19.2 V), 3.2 A (at 24 V)^*9 / Typ. 17 W
Environmental resistance	Enclosure rating		IP65 (IEC60529)^*10
	Ambient light		Incandescent lamp: 10000 lux or less^*11
	Ambient temperature		0 to +45°C^*12
	Relative humidity		85% RH or below (no condensation)
	Vibration resistance		10 to 500 Hz; Power spectral density: 0.033 G2/Hz; X, Y, and Z directions (IEC 60068-2-64)
	Shock resistance		15 G (IEC 60068-2-27)
Material			Aluminium
Weight			Approx. 2300 g
^1 The reference distance is the distance from the bottom edge of the head to the measurement centre of the Z-axis (height). See the Dimensions section for the installation reference plane. ^2 Do not view the beam directly using optical instruments (such as eye loupes, magnifiers, microscopes, telescopes, or binoculars). Observing the laser output using optical instruments is dangerous and may damage the eyes. ^3 Laser classification performed based on IEC60825-1 in accordance with FDA (CDRH) Laser Notice. ^4 The measured target is a KEYENCE standard target. Sigma value when the average height of 200 × 200 points in the centre of the field of view is measured using the height tool with reciprocating imaging OFF. ^5 The measured target is a KEYENCE standard target. Sigma value when the distance between two circles of 500 points in diameter set 1000 points apart at the centre of the field of view on a greyscale image is measured using the circle and circle distance tool with reciprocating imaging OFF. ^6 The measured target is a KEYENCE standard target. Value when the average height of 200 × 200 points is measured using the height tool with reciprocating imaging OFF. See the Dimensions section for the high-accuracy area reference plane. ^7 With YZ range minimum and Y thinning maximum. ^8 Laser ON input is enabled only when connected to a controller. ^9 The maximum value may be exceeded when extreme acceleration is applied. ^10 With an OP cable connected. ^11 When measuring white paper, illuminance on the sensor head receiving surface when light is applied to white paper. ^12 The head needs to be mounted to a metal plate to be used.

Data Sheet (PDF) Other Models