Controller PNP Type LS-9500P

Model

LS-9500P

Type

Controller: PNP output type

No. of connectable sensor heads

2

Head compatibility

Yes

Display

Minimum display unit

0.01µm

Display range

±99,999.99 µm to ±9,999.9 mm

LED display

POWER ON indicator, ERROR indicator

Input terminal block

Encoder input

NPN/PNP open-collector output, voltage output (5 V/12 V/24 V), line-driver output

Synchronous 1, 2 input

Voltage input

Auto-zero 1, 2 input

Reset 1, 2 input

Storage trigger input

Storage enable input

Storage data clear input

Statistics 1, 2 input

Statistics clear 1, 2 input

Program selection input

Voltage input x 4 inputs

Output terminal

Analogue voltage output

±10 V x 2 outputs, output impedance 100 Ω

Analogue current output

4 to 20 mA x 2 outputs, compatible load max. 350 Ω

Universal output

PNP open-collector output x 10 outputs
Measured value and tolerance judgment output,
status output allocatable

Status 1, 2 output

PNP open-collector output

Total judgment output

Memory FULL output

Strobe 1, 2 output

Error output

PNP open-collector output (N.C.)

Interface

Ethernet

1000BASE-T / 100BASE-TX

USB

USB 2.0 HI-SPEED supported (USB 1.1 Full-SPEED compatible)

RS-232C

Measured value output, control I/O, setting change, baud rate can be selected up to 115,200 bps

Display and settings panel

LS-D1000 Max. four heads connectable

Rating

Power voltage

24 VDC ±10 %, including Ripple (P-P)

Current consumption

When LS-HA100 not used: 1.0 A max. when 1 head connected; 1.4 A max. when 2 heads connected
When LS-HA100 in use: 2.0 A max. when 3 heads connected; 2.3 A max. when 4 heads connected^*1

Environmental resistance

Ambient temperature

When LS-HA100 not used: 0 to +50 °C
When LS-HA100 in use: 0 to +45 °C

Relative humidity

20 to 85 % RH (No condensation)

Weight

Approx. 1,500 g