Sensor Head, Air Cylinder Model GT2-A32

GT2-A32 - Sensor Head, Air Cylinder Model

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		GT2-A32
Detection system		Scale Shot System, absolute (no tracking errors) type
Measuring range		32 mm
Resolution		0.5 μm
Indicated accuracy		3 µm (p-p)^*1
Measuring force	Downward mounting	2.1 N^*2
	Side mounting	1.8 N^*2
	Upward mounting	1.5 N^*2
Sampling cycle		1 ms
Fluid used		Dry air
Operation indicator light		2-colour LED (red, green)
Environmental resistance	Enclosure rating	IP67 (IEC)^*3
	Pressure resistance	1 MPa
	Applied pressure range	0.25 MPa to 0.50 MPa
	Ambient temperature	0 to +55 °C (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions^*4
Materials	Main body	Main body case: die-cast zinc, Cylinder section: aluminium alloy, Air joint resin: polyacetal, Air joint metal: nickel-plated brass, Indicator: polyarylate (PAR)
	Dust boot	NBR
	Contact	SUS304, SUS440C^*5
Sensor head cable		Optional (connect to the M8 connector)
Weight		Approx. 340 g (not including cable)
^1 Value when the ambient temperature is 20 °C. ^2 Representative value at the centre of the measuring range. Please note that the measuring force varies by the installation state of the dust boot. ^3 Connect an exhaust joint to the air tube and ensure that foreign matter does not enter the tube from joint. ^4 When using mounting bracket D (OP-84327), the double amplitude is 0.75 mm. ^*5 Contacts are available as options sold separately.