Sensor amplifier main unit IX-H2000

Model

IX-H2000

Main unit / expansion unit

Main unit

Display

Min. display unit

Z axis

10 μm ^*1

X axis

50 μm ^*1

Display range

Z axis

±999.99 to ±999 mm (with 4 selectable steps) ^*1

X axis

±999.95 to ±999 mm (with 4 selectable steps) ^*1

Tools

Scan mode

Height, Step, Average height, Pin height, MAX/MIN, Height area, Monochrome area, Width, Step calculation, Thickness calculation,
Position adjustment, 1-axis adjustment, 2-axis adjustment (Max. number of settings) Judgement: 16 tools, Position adjustment: 1 tool ^*2

Line mode

Height (Ave./Max./Min.), Step (Ave./Max./Min.), Edge position, Width/diameter, Step/width calculation, Thickness calculation,
Position adjustment, Tilt adjustment (Max. number of settings) Judgement: 16 tools ^*3, Position adjustment: 1 tool, Tilt adjustment: 1 tool ^*2

Other functions

Common

Zero/offset, Operating threshold adjustment, 2-point calibration, Measurement direction, Position correction NG measurement, Zero/offset recording, Capture mode (HDR),
Sensor date/time information addition, N.O./N.C. switching, I/O monitor, Automatic brightness adjustment, Lighting (ON/OFF), Total judgement conditions, NPN/PNP switching,
Simultaneous main unit/expansion unit input, Mutual interference prevention, Security

Scan mode

Measurement range, Measurement position (small/standard/large), Measurement mode, Measurement noise elimination, Imaging mode (high gain),
Tilt correction (fixed or real-time correction), Glare removal, Trigger input (internal/external), Trigger interval, Trigger delay, Trigger error, Monochrome histogram,
Area height histogram, Fixed reference area, Mask outline, Rotation range, Height image display on tool setting screen, Scaling function

Line mode

Average count, Laser position adjustment, Timing input, Head tilt correction (fixed only), Ambient light removal for measurement,
HOLD function, Alarm setting, Measurement method (Ave./Max./Min.), Laser sensitivity adjustment, Averaging filter, Median filter, X-axis median filter

Input

Input

Switchable between non-voltage input and voltage input
For non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit)
For voltage input: Maximum input rating 26.4 V, ON voltage 18 V or higher, OFF current 0.2 mA or lower, ON current 2 mA (for 24 V)

Number of inputs

8 (IN1 to IN8)

Function

IN1: External trigger ↑↓ / Timing input, IN2 to IN8: Enable by assigning optional functions
Assignable functions: Program switching, Laser emission stop, Zero/offset (batch), Reset (error only),
Reset (judgement value only) Reset (judgement value and error)

Output

Output

Open collector output; NPN/PNP switchable, N.O./N.C. switchable
For open collector NPN output: Maximum rating of 26.4 V, 50 mA (20 mA when linked to an expansion unit), residual voltage of 1.5 V or less
For open collector PNP output: Maximum rating of 26.4 V, 50 mA (20 mA when linked to an expansion unit), residual voltage of 2 V or less

Number of outputs

10 (OUT1 to OUT10)

Function

Enable by assigning the optional functions
Assignable functions: Total judgement result (All OK/Any OK/NG), Run, Busy, Error, Position adjustment result, Tilt adjustment result, Result of the logical operation of each tool,
Monochrome area / Height area tool result (OK/NG), Height / Step / Max./Min. / Calculation tool result (OK/NG/HIGH/LO), Alarm

Analogue voltage output

±5 V, 1 to 5 V, 0 to 5 V, Output impedance: 100 Ω ^*4

Analogue current output

4 to 20 mA, Max. load resistance: 350 Ω ^*4

Number of programs

32

Statistical information

Scan mode: Measured value / Degree of similarity (Max., Min., Ave.), Processing time (Latest, Max., Min., Ave.), Count (Number of OKs / Number of NGs / Number of triggers)
Line mode: Measured value / Degree of similarity (Max., Min., Ave.), Count (Number of OKs / Number of NGs / Number of triggers) ^{*1 *5}

Detection history

Saved history

Scan mode

50 (FTP/SFTP client function: Enabled/High-resolution mode: Enabled)
80 (FTP/SFTP client function: Enabled/High-resolution mode: Disabled)
70 (FTP/SFTP client function: Disabled/High-resolution mode: Enabled)
100 (FTP/SFTP client function: Disabled/High-resolution mode: Disabled)
^*6

Line mode

400 (FTP/SFTP client function: Enabled/High-resolution mode: —)
500 (FTP/SFTP client function: Disabled/High-resolution mode: —)
^*6

Save conditions

Selectable between NG only and All ^*6

Image data transmission (FTP/SFTP client function)

Destination

FTP/SFTP server

Method

Selectable between bmp, jpeg, and txt

Conditions

4 conditions
Selectable between All, Total judgement result (OK/NG), Result of each tool (OK/(NG and ALM)), and Result of the logical operation of each tool (OK/NG)

Ethernet

Standard

100BASE-TX/10BASE-T ^*7

Connector

RJ45 8-pin connector ^*7

Interface compatibility

CC-Link, DeviceNet®, EtherNet/IP™, EtherCAT®, RS-232C, BCD output, PROFINET, PROFIBUS, TCP/IP Non-procedural communication ^*8

Number of connectible units

Main units: 1, Expansion units: 1, Communication units (DL): 1

Ratings

Power voltage

24 VDC ±10% (including ripple)

Current consumption

Max. 1.9 A or less (With main unit only: 0.8 A or less, With unit expansion: 1.9 A or less) (Excluding output load) ^*9

Environmental resistance

Ambient temperature

0 to +50°C (No freezing)

Relative humidity

35 to 85% RH (No condensation)

Material

Main unit case: PC / Power connector: PA, POM / Analogue output connector: PA, POM / I/O connector: PA /
Head connector: Zinc + Ni plating, PA / Ethernet connector: Copper alloy + Ni plating / Rear heat sink: Aluminium / Main unit rear DIN rail fixing tab: POM / Nameplate: PC

Weight

Approx. 210 g