LED Lighting

CA-D series

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

Expansion Unit of LED lighting CA-DC20E

CA-DC20E - Expansion Unit of LED lighting

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		CA-DC20E
Type		Light control expansion unit
Output	Light control method	(1) Constant voltage control method (direct current light) (2) Pulse width modulation method (light emitting frequency： 100 kHz) [System setting]
	Intensity range	255 level digital [Program setting]
	Connection points	2 CH (LED connector connections and terminal block connections can be made)
	Voltage	12 VDC, 24 VDC [DIP switches can be used to switch the setting]
	Capacity	Max. 40 W (30 W/1 ch maximum)
	Synchronisation	FLASH output synchronization, continuous lighting [the controller can be used to switch the setting]
	Response speed	(1) Constant voltage control： under 10 ms during 12 V output, under 20 ms during 24 V output (2) Pulse width modulation method： under 1 ms during 12/24 V output
Display	LED display	Light intensity： display green/orange (over 128) Error displayed： red (all lit)
Input voltage		24 VDC ±10%
Rating	Current consumption	3.0 A (12 V output at maximum load)6.5 A (24 V output at maximum load)
Environmental resistance	Ambient temperature	0 to +50 °C
	Relative humidity	35 to 85 % RH (No condensation)^*1
Weight		Approx 590 g
^*1 The environmental resistance of the LED illumination unit is an ambient operating temperature of 0 to +40 °C and an ambient operating humidity of 35 to 65 % RH (No condensation).