Specs : LED Lighting - CA-D series | KEYENCE International Belgium

Model		CA-DRM5X	CA-DRM10X	CA-DRM20X
Image
Type		Multi-Spectrum Lighting
Illumination method		Ring illumination (with support for optional CA-DRM (DA) Series dome attachment and CA-DRM (PA) Series polarisation attachment^1) Multi-Spectrum lighting / LumiTrax lighting / Normal lighting (single-colour lighting in all directions)^2 Constant current control mode (1,024-step digital gradation: With CA-DC60E connected / Adjustable per wavelength^*3)
Response speed		1 ms or less
LED	Peak wavelength	Ultraviolet: 405 nm / Blue: 457 nm / Green: 527 nm / Orange: 600 nm / Red: 660 nm Far red: 730 nm / Infrared: 860 nm / White: 600 nm (All values approximate)
Controller connection		Dedicated cable (3 m/5 m/10 m), Max. 30 m (with extension cables^*4)
I/F input		12-pole connector (dedicated cable)
Power consumption		51.4 W (during normal light emission)	71.0 W (during normal light emission)
Environmental resistance	Ambient temperature	0 to 40 °C
	Relative humidity	65%RH or less (No condensation)
Weight		Approx. 560 g (With dome attachment: Approx. 680 g / With polarisation attachment: Approx. 690 g)	Approx. 600 g (With dome attachment: Approx. 820 g /With polarisation attachment: Approx. 810 g)	Approx. 1,080 g (With dome attachment: Approx. 1,730 g /With polarisation attachment: Approx. 1,570 g)
^1 The UV and IR wavelengths cannot be used when the polarisation attachment is attached. ^2 Continuous lighting can only be set during normal lighting when brightness value control is set to ON. ^3 Simultaneous lighting of multiple colours is not supported. ^4 Connection of up to two dedicated extension cables is allowed.

Back to top

Ring Lights (Direct)

Model

CA-DRR3

CA-DRW3

CA-DRB3

CA-DRR5

CA-DRW5

CA-DRB5

CA-DRR7

CA-DRW7

CA-DRB7

CA-DRR9

CA-DRW9

CA-DRB9

Image

Type

Ring lights (direct)

LED Colour

Red

White

Blue

Red

White

Blue

Red

White

Blue

Red

White

Blue

Diffusion plate

OP-42287

OP-87038

OP-87040

OP-42286

Polarizing plate

OP-42285

OP-87039

OP-87041

OP-42284

Power consumption

1.5 W

2.9 W

3.2 W

3.6 W

7.2 W

7.7 W

8.3 W

7.9 W

Input voltage

12 VDC

Weight

Approx. 20 g

Approx. 40 g

Approx. 60 g

Approx. 90 g

Approx. 80 g

Back to top

Ring Lights (Direct)

Model	CA-DRR4F	CA-DRW4F	CA-DRB4F	CA-DRR10F	CA-DRW10F	CA-DRB10F
Image
Type	Ring Light (Direct) (Flat type)
LED Colour	Red	White	Blue	Red	White	Blue
Diffusion plate	OP-42337			OP-42339
Polarizing plate	OP-42336			OP-42338
Power consumption	1.5 W	2.9 W		8.3 W	7.9 W
Input voltage	12 VDC
Weight	Approx. 20 g			Approx. 90 g	Approx. 80 g

Back to top

Ring Lights (Multi-Angle)

Model	CA-DRR8M	CA-DRW8M	CA-DRB8M	CA-DRR13M	CA-DRW13M	CA-DRB13M
Image
Type	Ring Light (Multi-Angle)
LED Colour	Red	White	Blue	Red	White	Blue
Power consumption	6.6 W	10.6 W		12.5 W	19.8 W
Input voltage	12 VDC
Weight	Approx. 150 g			Approx. 260 g

Back to top

Square Lights (Multi-Angle)

Model	CA-DQW7M	CA-DQW10M	CA-DQW12M
Image
Type	Square Light (Multi-Angle)
LED Colour	White
Power consumption	11.3 W	16.9 W	19.9 W
Input voltage	12 VDC
Weight	Approx. 160 g	Approx. 250 g	Approx. 310 g

Back to top

LumiTrax™ Lights

Model	CA-DRW5X	CA-DRW10X	CA-DRW20X^*1
Image
Type	High-Intensity LumiTrax^TM Light
LED Colour	White
Power consumption	34.5 W (during normal light emission)	40.5 W (during normal light emission)	60.9 W (during normal light emission)
Weight	Approx. 190 g	Approx. 240 g	Approx. 610 g
^*1 When connecting two units, including the CA-DRW20X, to the CA-DC50E, DC30E, the maximum light intensity that can be set is limited. For details, contact KEYENCE.

Back to top

Bar Lights

Model

CA-DBR5

CA-DBW5

CA-DBB5

CA-DBR8

CA-DBW8

CA-DBB8

CA-DBR13

CA-DBW13

CA-DBB13

Image

Type

Bar Light

LED Colour

Red

White

Blue

Red

White

Blue

Red

White

Blue

Diffusion plate

OP-42283

OP-87042

OP-42282

Polarizing plate

OP-42281

OP-87043

OP-42280

Power consumption

1.7 W

2.9 W

3.6 W

4.8 W

4.2 W

7.3 W

Input voltage

12 VDC

Weight

Approx. 35 g

Approx. 40 g

Approx. 60 g

Approx. 80 g

Approx. 90 g

Back to top

Bar Lights

Model	CA-DBW12W	CA-DBW24W
Image
Type	Bar Light
LED Colour	White
Diffusion plate	A diffusion plate is included with the CA-DBWxxW. The thickness of the diffusion plate is approximately 2 mm.
Power consumption	13.8 W	27.6 W
Input voltage	12 VDC
Polarizing diffusion plate	OP-87975^*1	OP-87976^*1
Weight	Approx. 195 g	Approx. 345 g
^*1 The included diffusion plate and polarising diffusion plate cannot be used with the product at the same time. There may be air bubbles or foreign substances on the surface of the polarizing diffusion plate, but these have no effect on the image quality. Even if such substances are present, the product is still within the inspection standards, and these substances do not indicate that the product is defective.

Back to top

Line Lights

Model	CA-DZW15D^*1	CA-DZW30D^*1	CA-DZW45D^*1	CA-DZW5
Image
Type	Diffuse Line Lights			Line Light
LED Colour	White
Power consumption	13.2 W	26.4 W	19.8 W × 2 ch^*2	4.7 W^*3
Input voltage	12 VDC
Weight	250 g	420 g	620 g	Approx. 240 g
^1 The diffusion plate is integrated into the light and is not removable. When using a line scan camera, use DC Mode on the CA-DC21E/DC40E. ^2 Connect this model to both channels. ^*3 When using a line camera with the CA-DC21E & CA-DC40E, set light configuration to DC mode.

Back to top

Line Lights

Model	CA-DBW34H	CA-DBW50H
Image
Type	High-Intensity, Large Bar Light
LED Colour	White
Diffusion plate	A diffusion plate is included with the CA-DBWxxH. The thickness of the diffusion plate is approximately 2 mm.
Power consumption	18.4 W × 2 ch^*1	19.8 W × 2 ch^*1
Input voltage	12 VDC
Polarizing diffusion plate	OP-87977^*2	OP-87978^*2
Weight	Approx. 1,050 g	Approx. 1,490 g
^1 Connect these models to both channels. ^2 The included diffusion plate and polarising diffusion plate cannot be used with the product at the same time. There may be air bubbles or foreign substances on the surface of the polarising diffusion plate, but these have no effect on the image quality. Even if such substances are present, the product is still within the inspection standards, and these substances do not indicate that the product is defective.

Back to top

Dome Lights

Model	CA-DDR8	CA-DDW8	CA-DDB8	CA-DDR15	CA-DDW15	CA-DDB15
Image
Type	Dome Light
LED Colour	Red	White	Blue	Red	White	Blue
Power consumption	5.8 W			11 W	18.8 W
Input voltage	12 VDC
Weight	Approx. 70 g			Approx. 130 g	Approx. 170 g

Back to top

Back Lights

Model	CA-DSR2	CA-DSW2	CA-DSB2	CA-DSR3	CA-DSW3	CA-DSB3
Image
Type	Back Light
LED Colour	Red	White	Blue	Red	White	Blue
Power consumption	2.2 W	2.9 W		3.6 W	5.8 W
Input voltage	12 VDC
Weight	Approx. 30 g			Approx. 40 g

Back to top

Back Lights

Model	CA-DSR9	CA-DSW7	CA-DSB7	CA-DSR15	CA-DSW15	CA-DSB15	CA-DSW30^*1
Image
Type	Back Light
LED Colour	Red	White	Blue	Red	White	Blue	White
Power consumption	14 W	18 W		27.4 W			19.8 W × 2 ch
Input voltage	12 VDC
Weight	Approx. 110 g	Approx. 90 g		Approx. 320 g			Approx. 1,780 g
^*1 Connect it to both channels.

Back to top

Coaxial Lights (Vertical)

Model

CA-DXR3

CA-DXW3

CA-DXB3

CA-DXR5

CA-DXW5

CA-DXB5

CA-DXR7

CA-DXW7

CA-DXB7

Image

Type

Coaxial Light (Vertical)

LED Colour

Red

White

Blue

Red

White

Blue

Red

White

Blue

Power consumption

1.8 W

1.9 W

5 W

4.9 W

6.7 W

10.1 W

Input voltage

12 VDC

Weight

Approx. 60 g

Approx. 230 g

Approx. 380 g

Back to top

Spot Lights

Model	CA-DPR2	CA-DPW2	CA-DPB2
Image
Type	Spot Light
LED Colour	Red	White	Blue
Power consumption	8.4 W (2.0 W)^*1
Input voltage	12 VDC
Weight	Approx. 20 g
^*1 The power consumption specification indicates the total consumption (CA-DP spot + CA-DP power adapter). The specification in parenthesis is just for the CA-DP spot light.

Back to top

Model				CA-DPU2
Image
Type				Dedicated power adapter
Compatible lighting				CA-DPR2, CA-DPW2, CA-DPB2
Weight				Approx. 120 g

Back to top

Low Angle Lights

Model	CA-DLR7	CA-DLR12
Image
Type	Low Angle Light	Low Angle Lights
LED Colour	Red
Power consumption	2 W	3.3 W
Input voltage	12 VDC
Weight	Approx. 40 g	Approx. 85 g

Back to top

Illumination Controller

Model		CA-DC30E	CA-DC21E^*5
Image
Type		Illumination Controller Only for XG/CV-X200/CV-X100 Series Compatible with CA-DRWxX lights only	Illumination Controllers Only for XG/CV-5000/CV-X200/CV-X100 Series
Input		-	Forced light stop: Input rating max. 26.4 V, min. 2 mA
Output	Light control method	Constant current control method	(1) Constant voltage control method (direct current light) (2) Pulse width modulation method (light emitting frequency: 100 kHz) [Program setting]
	Intensity range	255 level digital [Program setting]
	Connection points	2 ch (dedicated 6-pole circular connector)	2 ch (Supports LED connector and terminal block connections)
	Voltage	LumiTrax^TM light dedicated power supply	12 VDC/24 VDC [DIP switch setting]
	Capacity	Max. 81 W	Max. 40 W (30 W per channel)
	Synchronisation	Camera trigger/shutter speed synchronisation	FLASH output synchronisation/continuous lighting [Program setting]
	Response speed	Under 1 ms	(1) Constant voltage control: Max. 10 ms at 12 V output, Max. 20 ms at 24 V output (2) Pulse width modulation control: Max. 1 ms at 12/24 V output
Display	LED display	Out of which the current consumption of controller is 1.6 A.	Power indication, light volume indication
Rating	Power voltage	24 VDC ±10 %
	Current consumption	5 A (at maximum load)^*1	3.0 A (12 V output at maximum load) 6.5 A (24 V output at maximum load)^*1
Environmental resistance	Ambient temperature	0 to +50 °C^2^3
	Relative humidity	85% RH or less (No condensation)^*4
Weight		Approx. 430 g	Approx. 590 g
^1 Out of which the current consumption of controller is 1.6 A. ^2 Environmental resistance of the light emitting part is 0 to +40 °C ambient temperature and 35 to 65 % RH ambient humidity (no condensation). ^3 Limited by the ambient temperature of connected controllers. ^4 Environmental resistance of the light emitting part is 0 to +40 °C ambient temperature and 65% RH or less ambient humidity (no condensation). ^*5 Integrated lighting controller only for direct connection to a Keyence vision controller (CV-5000, CV-X and XG Series). Contact KEYENCE for more details.

Back to top

Specs LED Lighting CA-D series

Ring Lights (Direct)

Ring Lights (Direct)

Ring Lights (Multi-Angle)

Square Lights (Multi-Angle)

LumiTrax™ Lights

Bar Lights

Bar Lights

Line Lights

Line Lights

Dome Lights

Back Lights

Back Lights

Coaxial Lights (Vertical)

Spot Lights

Low Angle Lights

Illumination Controller